Designing a business card with ChatGPT, an image generator or Canva? Use this guide to turn your draft into a print-ready PDF for West Island Printing in Kirkland.
Set the card size, bleed and safe margin
- Finished size: 3.5″ wide × 2″ high.
- Artwork with bleed: 3.75″ × 2.25″. Extend backgrounds and edge-to-edge images ⅛″ past all four trim edges.
- Safe area: 3.25″ × 1.75″, centred. Keep text, logos and QR codes at least ⅛″ inside the trim line.
If your design app has separate document and bleed settings, set the document to the finished size and add bleed there. If you build a single canvas at the bleed size, account for the trim and safe area within that canvas.
Use AI for the design concept and set the text yourself
Ask AI for a layout, colour palette or background. Add your final name, contact details and logo as separate elements in a layout editor. Proof every character and test any QR code from a full-size printout.
Choose readable fonts
As a starting point, use 10–12 pt for the name and 8–10 pt for contact details. Treat 8 pt as a practical minimum for essential text. Go larger for thin lettering or light text on a dark background. Fonts such as Inter, Arial or Source Sans 3 in regular or medium weight are easy to read. Print at actual size before ordering.
Export and check the PDF
In Canva, choose PDF Print and check that the export includes your bleed. Use one page per printed side, front first. Keep type and logos as vectors where possible, aim for 300 ppi at final size for raster images, and use CMYK if your software supports it. Review spelling, dimensions and margins in the exported file.
See our artwork guidelines, shop business cards, or check same-day card options.
Copy-and-paste prompt for your AI tool
Attach your concept, logo and exact contact details, then copy the block below.
Prepare my existing business card design for West Island Printing. Use the attached concept and assets as the reference. Preserve the approved layout, logo, colours and wording. Use the exact contact details I supply. Ask for any missing or unreadable information before finalizing. Do not invent details or redraw my logo.
• Final trim: 3.5″ × 2″, landscape.
• Bleed: ⅛″ on all four sides. The PDF artwork must measure 3.75″ × 2.25″ including bleed. Extend edge-to-edge backgrounds and images through the bleed.
• Safe area: 3.25″ × 1.75″, centred. Keep all text, logos and QR codes at least ⅛″ inside the trim. Keep the clear space around any QR code.
• Typography: Use 10–12 pt for the name and 8–10 pt for contact details. Keep essential text at least 8 pt and use larger type for thin or reversed lettering. Use high contrast. Keep text editable while designing.
• Output: A print-ready PDF at actual size, one card per page and one page per printed side. Front first, back second if requested. Keep text and logos vector where possible. Embed fonts or outline them in the final PDF. Raster images should be 300 ppi at final size. Use CMYK when supported and tell me if the export is RGB. Keep guides and mockup elements out of the PDF. Include trim and bleed boxes if supported, and omit crop marks unless the shop requests them.
Before handing it over, report the actual PDF dimensions, page count, smallest essential type and colour mode. If you cannot export or verify the PDF, say exactly what remains to be done in a layout editor.